For a professional electric guitarist, he or she needs more than one guitar pedal.

What is a guitar pedal?

Guitar pedals are used to create effects to produce a guitar sound better than that it should with a guitar and an amp. These are made using circuitry of housed metal boxes that the guitarist has to step on to activate the guitar sound effect.

In the simplest description, the guitar and amp will make the overall tone; however, the guitar pedal will make the tone to the next level. Plus, with so many guitar pedal effects today, there is a never-ending combination of sound effects – starting from the subtle tone to tone-defining effects – all you need is the right set of guitar effects pedals.

If you are planning to set your guitar pedals today, the following are some tips on how to choose guitar effects pedals, which you may also read more details at a reliable Guitar Pedal reviews & tips.

Tip #1: Know the different guitar effects pedals

There is a wide variety of guitar effects pedals that you can find in the market today, and each one of these has specific effects that make new color to the table. Here are the common guitar pedals:

  • Distortion pedal
  • Overdrive (drive) pedal
  • Delay pedal
  • Reverb pedal
  • Wah pedal
  • Chorus pedal
  • Octave
  • Tremolo pedal

There a few more guitar pedals that you should be in familiar with if you are taking your electric guitar playing to the next level. Just remember that every pedal has a specific effect; for instance,

  • Gain-staging effects have overdrive, boost, distortion, volume control, and compression guitar pedals.
  • Frequency effects have EQ, Wah-wah and Envelope Filter, and Pitch Shifter/Harmony pedals.
  • Modulation effects have Tremolo and Vibrato, Chorus and Flanger, and Phaser/Phase Shifter pedals.
  • Time effects have Delay and Reverb
  • Other effects pedals may include Loopers, Loop Switchers, and Multi-effects pedals.

You should take note of each of the pedal’s purpose to make your every gig livelier.

Tip #2: Check the signal flow

If you have chosen your first few guitar pedals, the next step is to check if the pedals that you are going to buy are compatible with each pedal and that the signal flows accurately. The arrangement of the instruments and the accessories should start with the guitar, the gain stage (overdrive, distortion, volume control, and or boost), followed by frequency pedals (EQ, wah, and or pitch shifter), the next on the circuit must be the modulation pedals (tremolo, chorus, and or phaser), followed by the time pedals (delay and reverb), lastly, the amp.

So, make sure that each of the pedals you are going to purchase compliments each other because anything that you stick into the circuit or the path will and shall affect the overall tone.

Final Thoughts

It may be confusing but if you try to read a lot about guitar pedals, eventually, you’ll be able to figure things out. Also, you may read additional details about guitar pedals at Digi Pedal’s website.